SEAFLO MARINE WATER PRESSURE DIAPHRAGM PUMP 12V 10AMP MIN.EDPM S

Installation Preparation

• Mount on a solid surface in a accessible location for strainer cleaning and pump maintenance.
• Use flexible high-pressure hose on the pump inlet and outlet. The pumps ports and strainer should not be connected to plastic or rigid pipe, or the pump' normal motion will transmit through rigid plumbing causing noise, and possibly loosening or cracking components.
• Pump must use an adequate 40-mesh strainer. 
• Use a minimum of 3/8" [9mm] Inner Diameter plumbing. Smaller ID plumbing can cause high backpressure, cycling, low flow and noise. 
• Pump is designed for intermittent duty only. 
• Do not use these pumps for running a Reverse-Osmosis [RO] Filtration System. High-pressure continuous duty usage will shorten the life of the pump and it is not covered under warranty. 
• Wire size is 20 GA MINIMUM.
• Minimum power requirement is a 10 Amp circuit. 
• Reduce restrictions on inlet and outlet. This includes small inner diameter shut-off valves, winterizing valves and elbows.

Typical Applications

• Agricultural Spraying
  
• General Industrial
  
• Automotive
• Marine/RV

PUMP

• Max Pressure: 35 PSI
• Valves: EPDM
• Diaphragm: Santoprene
• GPM: 1.2
  
• Voltage: 12V

        Item Number: PDP1-012-035-21